Shipping calculated at checkout based on order weight and destination.
Quantity
Couldn't load pickup availability
Brand: Connect-Ease
Features:
ONE BATTERY, TROLLING MOTOR AND ELECTRONICS: Run your trolling motor and multiple graphs, live imaging, or forward-facing sonar transducers off a single 12V battery instead of rigging separate power for each. One battery to manage, not two.
18 INCHES OF 8-GAUGE TROLLING MOTOR RIGGING: Heavy 8-gauge positive and negative leads sized for what a trolling motor actually pulls, with 3 connections and a quick-snap battery connector so you're not crimping wire on the water.
MATCH YOUR BATTERY TO YOUR MOTOR'S DRAW: A lithium battery's BMS caps continuous current. If it can't supply your trolling motor's full draw, the motor runs restricted or shuts off rather than pulling more than the pack allows. Size the battery's continuous-amp rating to the motor, not just its amp-hours.
FUSED, HEAT-SHRINK SEALED CONNECTIONS: A fused connection protects your electronics, and heat-shrinkable splices keep corrosion out of every joint, season after season.
PACK-IN, PACK-OUT SIMPLICITY, PRO TESTED: Leave your wiring and rigging installed in the kayak and disconnect just the battery and electronics between trips via quick-snap connections. Lithium compatible and tested by pro anglers running multiple electronics at once.
model number: CONRCE312VRV
Part Number: CONRCE312VRV
Details: The YAK MAX PRO is a single-battery wiring system that runs your trolling motor and your electronics — multiple graphs, live imaging, forward-facing sonar transducers and black boxes — off one 12V battery instead of rigging separate power for each. It's a self-contained pack-in, pack-out system: wiring stays installed in the kayak, and only the battery and electronics disconnect between trips. Trolling motor power runs through 18 inches of 8-gauge positive and negative rigging with three connections and a quick-snap battery connector, sized for the current a trolling motor actually draws rather than a light-duty accessory circuit. The electronics side is a fused connection, so a spike on one device doesn't take out the rest of your rigging. Sizing your battery: Lithium batteries hold a flatter voltage curve than lead-acid and keep delivering current longer under load, but every lithium pack's BMS caps continuous output. If your battery's continuous-amp rating is below what your trolling motor pulls at full throttle, expect the motor to run restricted or shut down rather than draw more than the pack allows — match the battery to the motor, not just to the electronics. Construction: Heat-shrinkable splices seal every connection against corrosion, built for repeated seasons on the water. Lithium compatible. Pro tested. Battery not included.
